Frequency & Phase
Items in this category
Repeater I
Basic ● Increases the frequency of a quaptic ray ⇨ ⏻ Operating Power 20+ W ⇨ ⏻ Power Loss 8 % ⇨ ∀ Operating Frequency 0 - 5 Hz ⇨ ∀ Frequency +2.0 Hz
Repeater II
Intermediate ● Increases the frequency of a quaptic ray ⇨ ⏻ Operating Power 190+ W ⇨ ⏻ Power Loss 6 % ⇨ ∀ Operating Frequency 10 - 40 Hz ⇨ ∀ Frequency +12.0 Hz
Repeater III
Advanced ● Increases the frequency of a quaptic ray ⇨ ⏻ Operating Power 1,100+ W ⇨ ⏻ Power Loss 4 % ⇨ ∀ Operating Frequency 1,000 - 6,000 Hz ⇨ ∀ Frequency +2,400.0 Hz
Scatterer I
Basic ● Increases the frequency of a quaptic ray ⇨ ⏻ Operating Power 40+ W ⇨ ⏻ Power Loss 6 % ⇨ ∀ Operating Frequency 5 - 10 Hz ⇨ ∀ Frequency x1.4
Scatterer II
Intermediate ● Increases the frequency of a quaptic ray ⇨ ⏻ Operating Power 360+ W ⇨ ⏻ Power Loss 3 % ⇨ ∀ Operating Frequency 40 - 200 Hz ⇨ ∀ Frequency x1.8
Scatterer III
Advanced ● Increases the frequency of a quaptic ray ⇨ ⏻ Operating Power 1,800+ W ⇨ ⏻ Power Loss 3 % ⇨ ∀ Operating Frequency 40,000 - 160,000 Hz ⇨ ∀ Frequency x1.5
Polariser
Intermediate ● Increases the phase of quaptic rays ● The increase in phase depends on the phase crystal that the polariser is holding ● Right Click with a crystal to insert ⇨ ⏻ Operating Power 200+ W ⇨ ⏻ Power Loss 12 %
Interferometer
Intermediate ● Sets the phase of the main ray to the phase of the auxiliary ray ● The operating power only applies to the main beam ⇨ ⏻ Operating Power 650+ W ⇨ ⏻ Power Loss 8 %
Diffraction Grating I
Intermediate ● Increases the frequency of quaptic rays ● The closer the auxiliary input to the target phase, the greater the increase in frequency ● The operating power & frequency only apply to the main beam ● The target phase only applies to the auxiliary beam ⇨ ⏻ Operating Power 360+ W ⇨ ⏻ Power Loss 5 % ⇨ ∀ Operating Frequency 200 - 1,000 Hz ⇨ ∀ Frequency x1.8 ⇨ ۞ Target Phase 168 °
Diffraction Grating II
Advanced ● Increases the frequency of quaptic rays ● The closer the auxiliary input to the target phase, the greater the increase in frequency ● The operating power & frequency only apply to the main beam ● The target phase only applies to the auxiliary beam ⇨ ⏻ Operating Power 1,600+ W ⇨ ⏻ Power Loss 1 % ⇨ ∀ Operating Frequency 6,000 - 40,000 Hz ⇨ ∀ Frequency x2.0 ⇨ ۞ Target Phase 267 °